mqtt version with button2

platformio.ini

@@ -14,3 +14,4 @@ board = esp32doit-devkit-v1
 framework = arduino
 monitor_port = COM[13]
 monitor_speed = 115200
+lib_deps = knolleary/PubSubClient@^2.8

src/main.cpp

@@ -26,9 +26,17 @@
  */
 
 #include <IotWebConf.h>
+#include <PubSubClient.h>
 #include <Regexp.h>
+#include "Button2.h"
+
 
 WiFiUDP udp;
+WiFiClient espClient;
+PubSubClient client(espClient);
+
+#define MSG_BUFFER_SIZE	(50)
+char msg[MSG_BUFFER_SIZE];
 
 // -- Initial name of the Thing. Used e.g. as SSID of the own Access Point.
 const char thingName[] = "BADBell";
@@ -53,10 +61,9 @@ const char wifiInitialApPassword[] = "bell4home";
 
 #define BELL_PIN 12 // Pin 12 as default
 #define MINIMAL_GAP 30*1000 // 30 seconds between rings
+#define IMPULS 250 // minimal press of button
 
-int val = 0; // value from pin
-unsigned long last_low = 0; // time of uptime
-
+unsigned long last_sended = 0; // last transmit of message
 
 // -- Callback method declarations.
 void configSaved();
@@ -68,11 +75,14 @@ void sendPacket();
 DNSServer dnsServer;
 WebServer server(80);
 
+char mqttServerValue[STRING_LEN];
 char ipParamValue[STRING_LEN];
 char portParamValue[NUMBER_LEN];
 char bellParamValue[NUMBER_LEN];
 
 IotWebConf iotWebConf(thingName, &dnsServer, &server, wifiInitialApPassword, CONFIG_VERSION);
+
+IotWebConfParameter mqttServerParam = IotWebConfParameter("MQTT server", "mqttServer", mqttServerValue, STRING_LEN,"text","BADnet-gw.lan","BADnet-gw.lan",NULL);
 IotWebConfParameter ipParam = IotWebConfParameter("Mulicast ip param", "ipParam", ipParamValue, STRING_LEN,"text","224.1.2.3","224.1.2.3",NULL);
 IotWebConfSeparator separator1 = IotWebConfSeparator();
 IotWebConfParameter portParam = IotWebConfParameter("Port param", "portParam", portParamValue, NUMBER_LEN, "number", "1025..65535", "1234", "min='1025' max='65535' step='1'");
@@ -80,6 +90,38 @@ IotWebConfParameter portParam = IotWebConfParameter("Port param", "portParam", p
 IotWebConfSeparator separator2 = IotWebConfSeparator("Calibration factor");
 IotWebConfParameter bellParam = IotWebConfParameter("Bell number param", "bellParam", bellParamValue, NUMBER_LEN, "number", "1", "1", "step='1'");
 
+Button2 buttonBELL = Button2(BELL_PIN,INPUT_PULLDOWN,true,IMPULS);
+
+void callback(char* topic, byte* payload, unsigned int length) {
+  Serial.print("Message arrived [");
+  Serial.print(topic);
+  Serial.print("] ");
+  for (int i = 0; i < length; i++) {
+    Serial.print((char)payload[i]);
+  }
+  Serial.println();
+
+  // Switch on the LED if an 1 was received as first character
+  if ((char)payload[0] == '1') {
+    sendPacket();
+  } 
+
+}
+
+void change(Button2& btn) {
+  if (btn.isPressed()) {
+
+    Serial.print("released");
+
+    if (millis() - last_sended < MINIMAL_GAP) {
+      Serial.println("Minimal gap not meeted");
+      return;
+    }
+
+    sendPacket();
+  }
+}
+
 void setup() 
 {
   Serial.begin(115200);
@@ -88,6 +130,7 @@ void setup()
 
 //  iotWebConf.setStatusPin(STATUS_PIN);
 //  iotWebConf.setConfigPin(CONFIG_PIN);
+  iotWebConf.addParameter(&mqttServerParam);
   iotWebConf.addParameter(&ipParam);
   iotWebConf.addParameter(&separator1);
   iotWebConf.addParameter(&portParam);
@@ -109,22 +152,49 @@ void setup()
   pinMode(BELL_PIN, INPUT);
   digitalWrite(BELL_PIN, LOW); 
 
+  buttonBELL.setChangedHandler(change);
+
   Serial.println("Ready.");
 }
 
+void reconnect() {
+  // Loop until we're reconnected
+  while (!client.connected()) {
+    Serial.print("Attempting MQTT connection...");
+    // Create a random client ID
+    String clientId = "ESP32Client-BELL";
+    clientId += String(bellParamValue);
+    // Attempt to connect
+    if (client.connect(clientId.c_str())) {
+      Serial.println("connected");
+      // Once connected, publish an announcement...
+      client.subscribe("home/bell/sendring");
+    } else {
+      Serial.print("failed, rc=");
+      Serial.print(client.state());
+      Serial.println(" try again in 5 seconds");
+      // Wait 5 seconds before retrying
+      delay(5000);
+    }
+  }
+}
+
+
 void loop() 
 {
   // -- doLoop should be called as frequently as possible.
   iotWebConf.doLoop();
-  val = digitalRead(BELL_PIN);
-  if (val == 1) {
-    if (millis() - last_low > MINIMAL_GAP || last_low == 0) sendPacket();
-    else {
-      Serial.println("Minimal gap not meeted");
-      delay(500);
-    }
-    last_low = millis();
+  client.loop();
+  buttonBELL.loop();
+
+  if ((iotWebConf.getState() == IOTWEBCONF_STATE_ONLINE) && (!client.connected()))
+  {
+    client.setServer(mqttServerValue, 1883);
+    client.setCallback(callback);
+    reconnect();
   } 
+
+
 }
 
 /**
@@ -141,6 +211,8 @@ void handleRoot()
   String s = "<!DOCTYPE html><html lang=\"en\"><head><meta name=\"viewport\" content=\"width=device-width, initial-scale=1, user-scalable=no\"/>";
   s += "<title>WIFI BELL FOR BAD HOME</title></head><body>Bell for Wifi";
   s += "<ul>";
+  s += "<li>MQTT server address: ";
+  s += mqttServerValue;
   s += "<li>Multicast IP value: ";
   s += ipParamValue;
   s += "<li>Port of multicast message: ";
@@ -175,6 +247,9 @@ void sendPacket()
   udp.flush();
   udp.stop();
   
+  client.publish("home/bell/ring", msg);
+
+  last_sended = millis();
 }
 
 void sendRingPacket()